StarClamp Installation Kit 3 – Starlink Container Side Mount with Router Stand
StarClamp® Installation Kit 3 is the complete, no-drill Starlink kit for a container site office: a side mount that locks into the corner-casting lifting point outside, plus a router and power supply stand to keep everything tidy inside. Nothing is drilled or welded, so it suits hired containers and welfare cabins.
Key Features:
- Fixing plate, offset tube arm, pole adaptor and router & PSU stand.
- For Starlink Standard (Gen 3 / V4) and Standard 4X dishes.
- Fully cable managed, inside and out.
- Heavy-duty UK-made steel for exposed, windy sites.
- Better value than Kit 1 plus a separate router stand.
StarClamp® Installation Kit 3 — Complete Starlink Container Kit
Outside: a no-drill lifting-point mount for the dish. Inside: a steel stand for the router and power supply. One box, one visit, site online.
Overview
A professional Starlink install on a site office is more than a bracket for the dish. Inside the cabin the router and power supply end up balanced on a windowsill or trailing across the floor, where they get knocked, unplugged or damaged. Installation Kit 3 deals with both ends of the job in one box.
Outside, the StarClamp® fixing plate locks into the lifting aperture of the container's top corner casting — a reinforced structural point built to take far more than a satellite dish — and the offset tube arm lifts a Starlink Standard dish into clear sky. Inside, the StarClamp router and power supply stand gives the electronics a stable, cable-managed home on a desk or the floor. There is no drilling, no welding and no roof work, so the install respects container hire agreements and comes away cleanly when the cabin moves on.
Key Features
- Complete installation kit — everything needed to mount the dish and house the router and PSU
- Lifting-point side mount — no structural modification, no drilling or welding
- Engineered for high-wind sites with heavy-duty British steel and an electroplated finish
- Starlink pole adaptor sets the dish at the correct angle for reliable performance
- Router & PSU stand in electroplated steel with integrated cable management
- Fully cable managed from dish to router for a neat, protected install
- Quick to remove and relocate — ideal for leased and temporary site set-ups
Compatibility
- Starlink Standard (Gen 3 / V4) dishes
- Starlink Standard 4X dishes
- Starlink router and power supply on the included stand
- Standard ISO containers and container-built site offices and welfare cabins with ISO-pattern corner castings
Where It's Used
- Construction sites and welfare cabins — fast connectivity without breaching hire terms
- Solar farms and renewable energy — monitoring, security and remote operations
- Civil engineering and infrastructure — temporary compounds and site offices
- Logistics yards and depots — CCTV, network and operational systems
- Remote and off-grid locations — utility, energy and emergency deployments
What's in the Box
- 1 × StarClamp® shipping container mounting plate
- 1 × StarClamp® offset antenna tube arm
- 1 × StarClamp® Starlink pole adaptor
- 1 × StarClamp® floor / desk stand for the Starlink router and power supply
- Not included: Starlink dish, router, power supply or cables
Why Buy StarClamp from Netview CCTV
Netview CCTV is the main UK distributor for StarClamp®. Order online or collect from our Leicester trade counter, and talk to our team about everything else your site needs — Starlink networking with Ruijie and Reyee outdoor Wi-Fi and wireless bridges, Hikvision CCTV and site security. Call 0116 3800 838, Monday to Friday, 9am–5pm.
Starlink is a trademark of Space Exploration Technologies Corp. StarClamp® products are designed and manufactured independently in the UK and are not affiliated with or endorsed by SpaceX.
Detailed Specifications — StarClamp Installation Kit 3
| Identification | |
|---|---|
| SKU / MPN | SC-KIT3 |
| Brand | StarClamp |
| Product Type | Starlink shipping container installation kit with router & PSU stand |
| Kit Contents | |
| Mounting plate | 5 mm electroplated British steel, lifting-point fixing, cable management |
| Offset tube arm | Heavy-duty electroplated steel, welded to BS 4872 |
| Pole adaptor | Fibreglass-reinforced polyamide, stainless bolts into brass bushings, 20° dish angle |
| Router & PSU stand | Electroplated steel, desk or floor use, integrated cable management |
| Mounting | |
| Fixing method | Side mount through the corner-casting lifting point |
| Drilling / welding | None required |
| Tools | Standard hand tools |
| Compatibility | |
| Starlink | Standard (Gen 3 / V4) and Standard 4X dishes |
| Containers | Standard ISO containers and cabins with ISO-pattern corner castings |
| General | |
| Country of manufacture | United Kingdom |
| Markings | CE, UKCA (product labels) |
| Supplied by | Netview CCTV, Leicester — main UK distributor for StarClamp |
Frequently Asked Questions
What is the lifting point on a container?
It is the reinforced aperture in each top corner casting that cranes and spreaders use to lift the container. Kit 3 fixes into that aperture, so it is mounted on the strongest part of the box without any modification.
Is it suitable for rental containers and welfare cabins?
Yes. Nothing is drilled or welded, which keeps you within typical hire terms, and the whole kit comes off cleanly when the unit moves.
Which Starlink systems does it support?
Starlink Standard (Gen 3 / V4) and Standard 4X dishes, with the router and power supply on the included stand.
What is the difference between Kit 1 and Kit 3?
Both include the fixing plate, offset tube arm and pole adaptor. Kit 3 adds the StarClamp router and power supply stand for a tidy indoor install.
Do you have a roof-mounted alternative?
Yes — StarClamp Contractor Kit 4 combines a flat / corrugated roof stand, pole adaptor and the same router stand.
Installation & Resources — StarClamp Installation Kit 3
- Feed the rear bolt plate and Starlink cable into the side aperture of the top corner casting.
- Pass the M10 thread through the mounting plate, fit the nut, level the plate and tighten.
- Bolt the offset tube arm to the plate's 8 mm studs, fit the pole adaptor and click in the dish.
- Route the cable through the plate's cable hole and into the cabin.
- Slide the power supply and router into the stand, connect up and check for obstructions in the Starlink app.
| Resource | Format | Link |
|---|---|---|
| Compare every StarClamp kit and bracket | Web | Container Mounting range |
| Starlink help centre (setup, obstructions, mounting) | Web | starlink.com/support |
| Starlink dish specifications | Web | starlink.com/specifications |
| Outdoor Wi-Fi and wireless bridges for site networks | Web | Networking at Netview |
| Project, volume and technical enquiries | Web | Contact our team |
Planning Starlink across several compounds? Call our Leicester trade counter on 0116 3800 838.