Shipping Updates
Shipping: by DPD cut-off  time is 3pm
Click n Collect: 9.30~5pm by prior arrangement only

Veracity VLS-2P-C LONGSPAN Long Range Ethernet and POE Two Port Adaptor

£568.80 £474.00
SPECIAL ORDER – CALL FOR AVAILABILITY
SKU
VLS-2P-C

Veracity VLS-2P-C LONGSPAN Long Range Ethernet and POE Two Port Adaptor

Connect and power two IP cameras at high bandwidth and long distances over Cat6.

LONGSPAN Quad delivers POE to two devices over a single regular network cable at very long distances.

IP cameras can demand peak bandwidth several times their average data rate, especially in low-light or with high scene activity. LONGSPAN Duo is designed to work with any LONGSPAN Base unit to provide high-speed connections (with POE) for two IP cameras, or IP devices such as VoIP or access control, at up to 820 metres (2,690 feet) over a single network cable, supporting the full 200Mbps required (100Mbps up plus 100Mbps down) for 100BASE-T Ethernet. This supplies POE over the network cable, providing a total LONGSPAN Duo POE output budget of up to 25W at 600m and 15W at 800m. Optionally, a LONGSPAN Lite (no POE) can be used at the base end and a local PSU can power the Duo unit for a maximum POE output budget of 50W (25W per port). LONGSPAN devices self-configure for the best performance every time they are connected. No user setup, no DIP switch settings, and no system pairings are required. Veracity’s SAFEVIEW™ technology provides instant visible confirmation of LONGSPAN Duo’s status, power and diagnostics. This information is also available at the base end, when delivering POE from LONGSPAN Base units.

LONGSPAN Quad enables two IP POE devices to be connected at long distances

With LONGSPAN, IP cameras and other network devices can be connected and powered at distances of up to 820m, allowing total flexibility in camera siting and positioning.

Unrivalled Range and Power

Such high speed connections are essential as LONGSPAN Quad is designed to work with any LONGSPAN Base unit to provide high-speed connections (with POE) for two IP cameras at up to 820 metres (2,690 feet) over a single network cable, supporting the full 200Mbps required (100Mbps up plus 100Mbps down) for 100Base-TX Ethernet.

Flexible Power Options

LONGSPAN Quad is compatible with any other LONGSPAN device and would normally be used with a LONGSPAN Base unit. This supplies POE over the network cable, providing a total LONGSPAN Quad POE output budget of up to 25W at 600 metres and 15W at 800 metres. Optionally, a LONGSPAN Lite (no POE) can be used at the base end and a local PSU can power the Quad unit for a maximum POE output of 25W per port.

Upgrade Legacy UTP Cable

LONGSPAN and LONGSPAN Quad combinations also support 1-pair and 2-pair connections at even longer distances with reduced 10Base-T bandwidth. This allows analogue camera installations using UTP cable to be replaced with IP cameras, without the need to replace legacy cabling.

LONGSPAN automatically adapts to the cable pairs available, and delivers the same unrestricted 10 or 100Mbps full duplex network connection to full distance, assuring predictable IP video quality.

LONGSPAN is an attractive alternative to fibre as it delivers power and data over the same cable at distance

Whilst fibre can be a good solution for very long distances, LONGSPAN is ideal for typical external IP camera distances of 200-800m with the key advantage of power delivery.

Designed for Installers

LONGSPAN devices self-configure for the best performance every time they are connected. No user setup, no DIP switch settings, and no device pairings are required.

Veracity’s SAFEVIEW technology provides instant visible confirmation of LONGSPAN Quad’s status, power and diagnostics. This information is also available at the base end when delivering POE from LONGSPAN Base units.

Multi-Channel Configurations

A single-channel LONGSPAN Base unit at the base end may be used with single, dual or quad LONGSPAN Camera units at the camera end, to achieve 1, 2 or 4 IP channels at long distance. Up to 24 single-channel LONGSPAN Base units may be rack mounted in the optional 1U rack mount plate and may be powered by any of the Veracity 57V DC power supply options, including 1U PSU solutions which fit behind the LONGSPANs in the same 1U rack space for maximum channel density.

Power and Data Ranges

The first table below indicates the total data range for three typical cable types. The second table indicates the power available at each distance for Cat6 and Cat5e cables. The quoted power available is the total power budget across all two LONGSPAN Quad ports.

Maximum 25W POE output per port can be achieved by using a local Veracity power supply for the LONGSPAN Quad and a non-POE LONGSPAN Lite at the base end.

Features:

  • Long range point-to-point Ethernet over normal network cable
  • Full-performance 100Base-TX with PoE at over 820 metres
  • Provides two PoE ports to connect two IP devices over one cable
  • Optional local PSU can deliver 25W per port at device end
  • Ruggedised for high performance over wide temperature range
  • Compatible with LONGSPAN Base units