Veracity VOR-ORL OUTREACH Lite IP Extender

Ethernet Extender for non-POE connections

OUTREACH Lite provides a simple way to double the length of a 10/100 Ethernet connection. No configuration is required, it does not require a local power supply, and it does not restrict the throughput of the network link at all.

Compact and wall-mountable, OUTREACH Lite takes its power from the network cable using the universal 802.3af Power over Ethernet (POE) standard. Network connections can easily be upgraded to POE compatibility if it is not already available using a simple injector.

Note: OUTREACH Lite is powered by POE but does not forward it to other equipment. To extend network connections to devices that need POE or POE Plus, see Veracity's OUTREACH Max POE-forwarding Ethernet extender.

Rapid Installation:

Extending network cable runs from an existing POE switch port is as simple as connecting OUTREACH Lite in-line with the cable. Cable runs of up to 200 metres (656 feet) in length are possible, by using a single OUTREACH Lite to connect two individual sections of up to 100 metres (328 feet) each.

Veracity's OUTREACH Lite Ethernet extender requires no external power supply. It simply has two network ports which configure automatically on connection for network speed, duplex and crossover.

If no POE is available on the network, Veracity's OUTSOURCE injector can easily be added at either end of the connection. No other equipment is required by end devices, as all Cat5/Cat6 links are regular Ethernet connections.

Full-bandwidth Ethernet Extender:

Because OUTREACH Lite repeats the Ethernet signal before it can degrade, the network can be extended without any restriction on its data capacity. Thus the 200Mbit/s bandwidth of regular full-duplex 100BASE-T Ethernet is maintained, for maximum reliability and predictability of operation.

Go Further:

OUTREACH Lite can be used in combination with Veracity's OUTREACH Max POE-forwarding Ethernet extender, to create connections of 300 metres, 400 metres or even further.

For example, to extend a 100BASE-T connection to 400 metres (1312 feet) without any bandwidth restriction, two OUTREACH Max units would be located at 100 metre intervals, followed by an OUTREACH Lite. POE from the switch or injector would be forwarded by the OUTREACH Maxes as far as the OUTREACH Lite, so no power connections would be required along the connection.

This technique can be used to create unrestricted Cat5 network connections of greater than 2km (1.25 miles) in length if required. See Veracity's "Long Range Ethernet Extension" application note for more information.

OUTREACH Lite is powered by POE, so it can double Ethernet range without requiring a local power outlet.

OUTREACH Lite can be used in combination with Veracity's OUTREACH Max POE-forwarding Ethernet extender, to create connections of 300 metres, 400 metres or even further.

For example, to extend a 100BASE-T connection to 400 metres (1312 feet) without any bandwidth restriction, two OUTREACH Max units would be located at 100 metre intervals, followed by an OUTREACH Lite. POE from the switch or injector would be forwarded by the OUTREACH Maxes as far as the OUTREACH Lite, so no power connections would be required along the connection.

This technique can be used to create unrestricted Cat5 network connections of greater than 2km (1.25 miles) in length if required.  See Veracity's "Long Range Ethernet Extension" application note for more information.

Range:

At least 200m using a single OUTREACH Lite

Up to 2200m when used with combinations of OUTSOURCE and OUTREACH Max

Network:

10BASE-T / 100BASE-TX, full/half duplex (auto-negotiated)

Patch or crossover cables

POE in:

IEEE 802.3af Class 2 powered device

Device power 1.3 watts

POE out:

Not supported in OUTREACH Lite

Dimensions:

L 105mm x W 40mm x H 22mm

Firmware Warning: Please be aware that Hikvision products are region-specific and regionally supported. If you have purchased your Hikvision products from any other online source or unauthorized seller, they may not be compatible with the UK region’s firmware Updating the firmware on products not purchased from our site can lead to several complications in those products including complete failure. Your Hikvision warranty is void in this case. If you have any questions or concerns about the official status of your Hikvision product please contact Hikvision UK Customer Service at support.uk@hikvision.com

Do you require the Latest Hikvision FIRMWARE for your Hikvision product?

We supply the latest Software & Firmware Free of Charge for our customers only. All products purchased on this site will be shipped with the latest firmware installed
If you have purchased your Hikvision device from this site, email us with your name, invoice number, device model & the serial number, for the latest Hikvision Software & Firmware for your device(s)

Hikvision Versions are available for:

Latest Hikvision DVR Firmware
Latest Hikvision NVR Firmware
Latest Hikvision IP Camera Firmware
Latest Hkvision PTZ Camera Firmware

And Firmware for most other Hikvision Products. 

Updated Hikvision software are also available from Netviewcctv for:
iVMS-4200
iVMS-4200 MAC
iVMS-4500
SADP Tool
Hik-Connect
Disk Space Calculator
Bandwidth Calculator
Format Converter
Batch Configuration Tool

How to Activate & add a Hikvision Device to iVMS-4200 :

How to Setup Hik-Connect in iVMS-4200 :

How to Add Hikvision IP Cameras on iVMS-4200 and Create Groups :