Pyronix Wireless SMOKE-WE2 Two-Way Smoke Sensor
- Pyronix Two Way Enforcer Wireless Smoke Sensor
- 85dB alert
- Photoelectric smoke sensor
- Removable smoke chamber
- Test button
- One Push To Learn button
- Signal Strength Indicator on the device
- Pyronix High Security Wireless Encryption Protocol
- 868MHz transceiver FM technology
Description
Pyronix SMOKE-WE Two Way Enforcer Wireless Smoke Sensor
The ultimate firefighter
Alerting anyone to the presence of smoke
Where there is smoke, there is a risk to life, and the SMOKE-WE is ready to raise the alarm to protect people, pets and properties. Easy to install and a simple upsell to any Pyronix security system, the SMOKE-WE delivers safety and convenience, with the capability of HomeControl+ App push notifi cations and more.
Be in control with full low battery supervision
When the battery is running low the SMOKE-WE will begin to chirp once every 32 seconds, as well as send a signal to the control panel to report the issue. If the user has a HomeControl+ App connected to the system, they will also receive a push notification to draw their attention to the problem.
Rest with reassurance thanks to the manual test button
With a simple press of a button it is easy to verify the battery status to ensure that the SMOKE-WE is still alarm operational and ready to detect any smoke.
Loud & obvious alarms with local sounder & LEDs
The SMOKE-WE has a built-in 85dB local sounder and flashing red LED lights that provide a clearand obvious alarm when smoke is present.
Stay safe with tamper protection
If the housing of the SMOKE-WE is not fitted properly during the initial installation, or after a battery change, the rear tamper will trigger to alert that it is not fitted correctly.
Faster installation, less invasion, upsell opportunities & the same superior security with two-way wireless technology
No wires, no fuss
As the system is fully wireless there is no need to run wiring by lifting floorboards or moving furniture, saving you time and money.
One-Push-To-Learn
A feature in all Enforcer wireless devices that means learning them onto the system can be done in seconds. A simple one button learning feature for easy installation.
Signal Strength Indicators (SSI)
SSI in all Enforcer wireless devices allow them to be optimally positioned during installation, without the need to refer back to the panel.
Protecting homes and lives against the threat of fire.
With the SMOKE-WE fitted, sleep safely knowing that your home is protected.
Fully supervised for low battery, the SMOKE-WE will begin to chirp once every 32 seconds when the battery is low in power. It will also send a signal to your control panel reporting the status.
Manual testing
The manual test button verifies battery status and alarm operation to ensure that the device is working properly
Built-in 85dB local sounder and flashing red LED light
Indicate the presence of smoke
Tamper protection
If the front of the device has not been replaced after a battery change or maintenance, the rear tamper protection will trigger a warning that the device is not fitted correctly
Secure two-way wireless protocol
Allows easy learning of the detector to the system
SKU & Info
| Coming soon | No |
|---|---|
| SKU | SMOKE-WE2 |
| BRAND | PYRONIX |
Accessories
Firmware
Firmware Warning: Please be aware that Hikvision products are region-specific and regionally supported. If you have purchased your Hikvision products from any other online source or unauthorized seller, they may not be compatible with the UK region’s firmware Updating the firmware on products not purchased from our site can lead to several complications in those products including complete failure. Your Hikvision warranty is void in this case. If you have any questions or concerns about the official status of your Hikvision product please contact Hikvision UK Customer Service at support.uk@hikvision.com
Do you require the Latest Hikvision FIRMWARE for your Hikvision product?
We supply the latest Software & Firmware Free of Charge for our customers only. All products purchased on this site will be shipped with the latest firmware installed
If you have purchased your Hikvision device from this site, email us with your name, invoice number, device model & the serial number, for the latest Hikvision Software & Firmware for your device(s)
Hikvision Versions are available for:
Latest Hikvision DVR Firmware
Latest Hikvision NVR Firmware
Latest Hikvision IP Camera Firmware
Latest Hkvision PTZ Camera Firmware
And Firmware for most other Hikvision Products.
Updated Hikvision software are also available from Netviewcctv for:
iVMS-4200
iVMS-4200 MAC
iVMS-4500
SADP Tool
Hik-Connect
Disk Space Calculator
Bandwidth Calculator
Format Converter
Batch Configuration Tool