Opening & Shipping Times

Sales & Collections (Leicester) : Monday~Friday 9am-5pm
Shipping : Monday~Friday 3pm cut off time
- Closed Weekends & Bank Holidays -

Pyronix Wired PIR FPXD10TTAM3 PIR 10m External

Special Price £71.58 Regular Price £112.80
In stock
Only 1 left
  • Pyronix Tri Anti-Mask Technology PIR 10m External Detector
  • Tri-anti masking technology
  • Three Microwave frequency bands
  • Digital temperature compensation
  • Built In walk test buzzer
  • Heavy duty ultra violet filter
  • Lens masking grids
  • Weatherproof sealed optics
£11280
£7158

Description

Pyronix FPXD10TTAM3 Tri Anti-Mask Technology PIR 10m External Detector

High Security Outdoor Protection 10m range anti-mask/tri technology detection.

The XD10TTAM is a high security outdoor detector from Pyronix, combining established and patented technologies such as Tri Digital Detection Signal Processing and Tri Anti-Mask Technology which have been adapted to enhance it’s performance in extreme outdoor conditions.

Tri Detection Range

The range of XD10TTAM is determined by the combined range of the three detection technologies it uses that are two PIR sensors and one microwave detector.

The microwave detector range is adjustable from 0m to 15m while the PIR range is fixed to 10m. The Tri Detection range is adjustable by changing the microwave detection range.

2.4m Installation Mode (Lens 5)

In this mode the detector is installed at a height of 2.4m providing volumetric coverage of the area and animal immunity of up to 10kg.

Heavy Duty Ultra Violet Filter

Ultra violet light is always present in our environment. It is particularly strong at high altitude and sea side. The exposure to such high radiation reduces performance and can fully blind the PIR lenses. Therefore the XD10TTAM lenses are
manufactured to high standards and coated with a heavy duty ultra violet filter to ensure their protection from UV radiation.

Hood and Optional Bracket

Both, the hood and the back of the XD10TTAM are equipped with a cable channel, as well as a back wall tamper for added protection.

The hood is fixed to the back of the detector to secure its high performance in any weather condition.

Wall Bracket

The optional heavy duty tamper proof bracket consists of a cable through feature for easy installation and added security as the wires are hidden away within the bracket. It moves 45° left and right allowing a total area coverage of up to 90° when two detectors are installed next to each other. If for any reasons the wire can not be hidden in the bracket there is the possibility to install a conduit to protect the cables.

Supplied Masking Grids

Fixed Masking Grid

The fixed masking grid is used to create two non overlapping detection areas. This is recommended to be used on installations in extremely harsh environmental conditions where exposure to direct, low and bright sun light and reflections on snow covered surface is unavoidable.

Adjustable Masking Grid

The adjustable masking grid allows the creation of targeted protection areas by removing strips from the grid. This allows the creation of: 1. Specific targeted detection areas 2. Further prevention from possible false alarm activations caused by swaying trees or passing traffic within the Tri Detection range.

SKU & Info

More Information
Coming soon No
SKU FPXD10TTAM3
BRAND PYRONIX

Firmware

Firmware Warning: Please be aware that Hikvision products are region-specific and regionally supported. If you have purchased your Hikvision products from any other online source or unauthorized seller, they may not be compatible with the UK region’s firmware Updating the firmware on products not purchased from our site can lead to several complications in those products including complete failure. Your Hikvision warranty is void in this case. If you have any questions or concerns about the official status of your Hikvision product please contact Hikvision UK Customer Service at support.uk@hikvision.com


Do you require the Latest Hikvision FIRMWARE for your Hikvision product?

We supply the latest Software & Firmware Free of Charge for our customers only. All products purchased on this site will be shipped with the latest firmware installed
If you have purchased your Hikvision device from this site, email us with your name, invoice number, device model & the serial number, for the latest Hikvision Software & Firmware for your device(s)

Hikvision Versions are available for:

Latest Hikvision DVR Firmware
Latest Hikvision NVR Firmware
Latest Hikvision IP Camera Firmware
Latest Hkvision PTZ Camera Firmware

And Firmware for most other Hikvision Products. 

Updated Hikvision software are also available from Netviewcctv for:
iVMS-4200
iVMS-4200 MAC
iVMS-4500
SADP Tool
Hik-Connect
Disk Space Calculator
Bandwidth Calculator
Format Converter
Batch Configuration Tool

Tools

HIKVISION DESKTOP TOOLS

HIKVISION ONLINE TOOLS

iVMS-4200

How to Activate & add a Hikvision Device to iVMS-4200 :

How to Setup Hik-Connect in iVMS-4200 :

How to Add Hikvision IP Cameras on iVMS-4200 and Create Groups :